Electrical Engineering : Create a bulk quote request

Electric Motors

Electrical Engineering

Industrial Business

Information Technology

Instrumentation

Safe Electrical Practices — Safe Electrical Practices
In eCubed

This lesson covers basic electrical safety practices based on the OSHA standards stated in 29CFR 1910 requiring qualification for work on live circuits. The lesson provides an understanding of electricity focused on increased awareness and prevention of industrial accidents. <br /><br />

Ammeters, Meggers, and Wheatstone Bridge Bundle — Ammeters, Meggers, and Wheatstone Bridge Bundle
In eCubed

The library describes megohmmeters, Wheatstone bridges, and clamp-on ammeters. It gives examples of the use of these instruments, identifies their components, and defines their functions. The lessons also describe safety and selection considerations for their use, how to set up the instruments, how to connect them to the systems under test, and how to take and read measurements. <br /><br />

Inverters – Operation and Maintenance (A8019) — Inverters – Operation and Maintenance (A8019)
In InteractivePro2

This lesson explains the design and operation of inverter drives, and describes control features provided by inverter drive systems. This lesson provides procedures for inspecting and maintaining inverter drives, and gives explanations of common error messages. <br /><br />

Oscilloscopes (A8001) — Oscilloscopes (A8001)
In InteractivePro2

This lesson explains and demonstrates the use of both analog and digital oscilloscopes. Participants will learn the controls on each type of oscilloscope, how to use a probe with an oscilloscope, how to set up an oscilloscope, and how to determine various measurements taken with an oscilloscope. <br /><br />

Ohm's Law (A8201) — Ohm's Law (A8201)
In InteractivePro2

This lesson shows and explains how a basic DC electrical circuit operates and how voltage, current, and resistance behave in a series circuit, a parallel circuit, and a series parallel circuit. Procedures for using Ohm??s Law to calculate voltage, current, and resistance in a circuit are also provided. <br /><br />

Multimeters (A8002) — Multimeters (A8002)
In InteractivePro2

This lesson demonstrates and explains how to use both a digital and an analog multimeter. During this lesson, voltage, resistance, current, capacitance, and frequency are measured. This lesson also describes some of the more common features of a digital multimeter. <br /><br />

Maintaining Distributed Control Systems — Maintaining Distributed Control Systems
In InteractivePro2

This lesson provides an understanding of the fundamentals of Distributed Control Systems (DCS). The evolution of computer control systems is discussed and the architecture of contemporary DCS is described in detail. The lesson covers hardware, configuration, data communications, user interface and 1/0 devices. <br /><br />

Introduction to Digital Devices (A8207) — Introduction to Digital Devices (A8207)
In InteractivePro2

This lesson covers how digital electronic components process and transmit information, the principles of operation of basic logic gates, and how binary numbers can be used to represent information. <br /><br />

Electrical Safety: Awareness — Electrical Safety: Awareness
In InteractivePro1

Selected Courses

Please add courses from the left using the "+" button

No. of Licenses*

Name

Email Address*

Phone

Company

Message/Notes