Multimeters Library
About this class
This five (5) lesson library provides training for persons working with electrical or electronic test equipment.
Prerequisites
This library is designed with no prior knowledge required.
Description
This library consists of five designed to provide training for persons working with electrical or electronic test equipment. These lessons demonstrate and explain how to use both a digital and an analog multi meter. During these lessons, voltage, resistance, current, capacitance, and frequency are measured. The final lesson also describes some of the more common features of a digital multimeter.
Audience
This library is designed to provide training for persons working with electrical or electronic test equipment.
Content
-
Announcements
This is the first lesson in the iKNOW™ Multimeters Library. The lesson
presents the types of multimeters. The lesson describes the display
area, function switch, and leads and jacks on a digital multimeter.
-
Digital Multimeters
This is the second lesson in the iKNOW™ Multimeters Library. This lesson
demonstrates various aspects of an analog multimeter, including how to
adjust mechanical zero, how to interpret a reading on the voltage and
resistance scales, and how to set the function and range switches.
-
Analog Multimeters
This is the third lesson in the iKNOW™ Multimeters Library. This lesson
trains the learner in the inspection of a multimeter, the steps that
should be taken before using a multimeter, and how to perform a
continuity check.
-
Multimeters Selection and Inspection
This is the fourth lesson in the iKNOW™ Multimeters Library. This lesson
trains the learner to use a multimeter to measure resistance, AC
voltage, DC voltage, current, frequency, and capacitance.
-
Using Multimeters
The final lesson in the iKNOW™ Multimeters Library, this lesson
instructs the participant in the use of the advanced features of digital
multimeters.
-
Advanced Features of Digital Multimeters