eCubed Training Courses | Page 12

Looking to buy in bulk?
Create a request
EXPLORE FREE COURSES

Controllers and Recorders (APM03)
Instrumentation
This lesson focuses on operation and maintenance of pneumatic controllers and recorders. The lesson teaches how the bellows, relays, links, and levers within a controller are configured to provide proportional, integral, and derivative control modes, both in direct and reverse action. Common maintenance practices are covered, including relay and restrictor cleaning and replacement, along with controller and recorder calibration.

Professional Development Hours: 1
$23.00

Counters and Shift Registers (A9403)
Electrical Engineering
This lesson discusses the principles of counters and their various applications. The lesson also explains the principles and features of shift registers, emphasizing serial load shift registers, parallel load shift registers, and universal shift registers. Troubleshooting counters and shift registers is also addressed.

Professional Development Hours: 1
$23.00

Controller Tuning (ACTAV)
Instrumentation
This lesson explains tuning methods and principles behind the three methods of tuning a controller: ultimate, reaction curve, and trial and error. The lesson presents the characteristics of a properly timed process response and relates these to proportional, integral, and derivative control actions. In addition, step-by-step procedures for tuning controllers using each method are demonstrated.

Professional Development Hours: 1
$23.00

Control Charts for Attributes (A8504)
Mechanical
This lesson discusses principles of attribute control charts and shows how to plot and interpret various control charts for attributes, including p, np, u, c, and multiple characteristic charts.

Professional Development Hours: 1
$23.00

Control Charts for Variables (A8503)
Mechanical
This lesson explains how to interpret variable control charts in order to determine whether or not a process is in statistical control. The lesson introduces the concept of performance-based limits for process control and presents basic guidelines for proper sampling. In addition, the principles for interpreting control charts are presented.

Professional Development Hours: 1
$23.00

Computerized and Laser Alignment (A8307)
Mechanical
This lesson explains how to determine a computer's specifications and introduces proper steps to take in correcting misalignment with the use of a laser.

Professional Development Hours: 1
$23.00

Conduit Bending and Installation (A8018)
Electrical Engineering
This lesson provides instructions and interactions concerning general conduit bending and installation, in accordance with the National Electrical Code (NEC). This lesson defines a conduit system, lists general specifications for use of types of conduit, and introduces the major components or materials of a basic conduit system. This lesson also demonstrates and provides instruction on general methods and practices for cutting, cleaning, bending and installing conduit.

Professional Development Hours: 1
$23.00

Calibration Principles (AIC01)
Instrumentation
This lesson introduces basic concepts of instrument calibration. The lesson explains the characteristics of proper instrument performance as well as how to identify common instrument errors. In addition, the steps in a typical calibration procedure are demonstrated.

Professional Development Hours: 1
$23.00

Codes, Encoders, Decoders, and Flip-Flops (A9402)
Electrical Engineering
This lesson discusses codes, encoders, and decoders and explains how to troubleshoot these circuits. In addition, the lesson addresses the operation and troubleshooting of flip-flops.

Professional Development Hours: 1
$23.00

Calibrating Temperature Instruments (AIC03)
Instrumentation
This lesson teaches basic procedures for checking the calibration of thermocouples and RTDS, as well as for calibrating temperature instruments including thermocouple transmitters and RTD transmitters. Procedures using thermocouple and RTD tables are presented in addition to calibration steps using a digital temperature calibrator.

Professional Development Hours: 1
$23.00

Calibrating Level Instruments (AIC05)
Instrumentation
This lesson demonstrates the steps for calibrating level instruments. Specifically, the lesson shows set-up procedures for differential pressure transmitters and electronic displacement level transmitters in a variety of applications.

Professional Development Hours: 1
$23.00

Calibrating Pressure and Differential Pressure Instruments (AIC02)
Instrumentation
This lesson demonstrates the necessary steps for calibrating pressure instruments. The lesson also identifies procedures and set-up equipment for pressure calibration.

Professional Development Hours: 1
$23.00