eCubed Training Courses | Page 13

Looking to buy in bulk?
Create a request
EXPLORE FREE COURSES

Boiler Systems (ABC01)
Instrumentation
This lesson focuses on the principles of operation of boiler systems and teaches the thermodynamic principles governing steam generation and heat transfer. Basic boiler components and operations will also be covered. The lesson provides a detailed overview of how steam is generated on the water side of the boiler as well as the fundamentals of combustion and how energy is converted in the boiler??s furnace.

Professional Development Hours: 1
$23.00

Binary Logic Circuits (A9401)
Electrical Engineering
This lesson explains and demonstrates binary logic signals and the use of logic gates in integrated circuits. The lesson also describes Boolean expressions, truth tables, and Karnaugh mapping in relation to the logic of complex circuits. These topics are directly applied to troubleshooting digital circuits.

Professional Development Hours: 1
$23.00

Boiler Controls (ABC02)
Instrumentation
This lesson focuses on the control systems of boilers and teaches the importance of proper drum level and basic methods for controlling that level. Shrink and swell will be explained. Furnace draft control and basic control strategies for liquid, gas and solid fuel boilers will also be covered as well as the fundamentals of combustion testing. The lesson also provides information about steam temperature control and unit management systems.

Professional Development Hours: 1
$23.00

Batch Process Systems (APO03)
Instrumentation
This lesson introduces industrial batch process systems. The lesson includes batch process steps, types, and operation as well as batch process control strategies.

Professional Development Hours: 1
$23.00

Failure Analysis (A8101)
Mechanical
This is the third lesson in the iKNOW® Mechanical Seals Library. This lesson demonstrates the steps necessary to prepare to remove, and to remove, a failed mechanical seal. The lesson trains the participant in failure analysis to determine the cause of seal failure and identify the means to correct the problem or condition that caused the failure.

Professional Development Hours: 1
$23.00

Analog and Digital Oscilloscopes (ATI04)
Instrumentation
This lesson presents the operating principles and procedures for using analog and digital oscilloscopes. The lesson also provides an understanding of how these test devices work, the functions performed, and how they are utilized. Procedures for using an oscilloscope to measure amplitude, period, and frequency are also demonstrated.

Professional Development Hours: 1
$23.00

Reciprocating Air Compressors: Disassembly, Inspection, and Reassembly (A9002)
Mechanical
This lesson demonstrates how to disassemble, inspect, and repair various components of a reciprocating compressor. Included in this lesson are the maintenance procedures for discharge valves, suction valves, unloaders, and cylinders and pistons. Additionally, the lesson covers disassembly, inspection, and repair as well as the reinstallation of the components.

Professional Development Hours: 1
$23.00

Ammeters, Meggers, and Wheatstone Bridge (A8003)
Electrical Engineering
This lesson describes Wheatstone bridges, megohmmeters, and clamp-on ammeters. This lesson provides examples of the use of these instruments, identifies their components, and defines their functions. This lesson also describes safety and selection considerations for their use, describes how to set up the instruments, how to connect them to the systems under test, and how to take and read measurements. This lesson describes how to take a resistance reading of a Three-phase AC motor with a megohmmeter, how to set mechanical and electrical zero on a Wheatstone bridge, and how to interpret a Wheatstone bridge reading. This lesson also defines the ??record? and ??lock? features of a clamp-on ammeter and describes how to modify the range of the meter for the best results.

Professional Development Hours: 1
$23.00

Reciprocating Air Compressors: Principles and Troubleshooting (A9001)
Mechanical
This lesson explains the normal operating conditions for a reciprocating air compressor. The lesson also focuses on how to troubleshoot typical compressor problems such as knocking, failure to unload, and excessive discharge temperature.

Professional Development Hours: 1
$23.00

Advanced Control Charts (A8505)
Mechanical
This lesson explains how to calculate the control limits for variable and attribute control charts. The lesson also shows how to construct and interpret cusum charts in order to improve process performance.

Professional Development Hours: 1
$23.00

Air and Water Analysis (AAS04)
Instrumentation
This lesson trains participants to apply the concepts and terminology associated with the principles of process analysis to air and water analysis. The agencies and regulations governing air and water quality are described, and the ways in which various types of analyzers detect and measure the components in air and water are discussed.

Professional Development Hours: 1
$23.00

Actuators and Positioners (ACV02)
Instrumentation
This lesson trains participants to recognize, identify, and understand actuators and positioners as they relate to control valve trim. The parts and operation of diaphragm and piston actuators as well as pneumatic and electropneurnatic positioners are demonstrated.

Professional Development Hours: 1
$23.00