eCubed Training Courses | Page 11

Looking to buy in bulk?
Create a request
EXPLORE FREE COURSES

Distributed Control Fundamentals (ADC01)
Instrumentation
This lesson provides an understanding of the fundamentals of Distributed Control Systems (DCS). The evolution of computer control systems is discussed and the architecture of contemporary DCS is described in detail. The lesson covers hardware, configuration, data communications, user interface and 1/0 devices.

Professional Development Hours: 1
$23.00

Electrical Diagrams (A8005)
Mechanical
This lesson presents information about three types of electrical diagrams: building diagrams, single-line diagrams, and wiring diagrams. This lesson explains how to identify components, equipment, wire and cables on these diagrams how to relate the diagrams to the installed hardware and how to use diagrams for maintenance and troubleshooting problems.

Professional Development Hours: 1
$23.00

Developing Logical Thinking (A7501)
Mechanical
This lesson teaches participants how to develop logical thinking and create a personal troubleshooting outlook that will prove valuable under any troubleshooting situation.

Professional Development Hours: 1
$23.00

Distillation Columns (APO02)
Instrumentation
This lesson introduces the concepts of distillation including the components, operation, and principles of distillation systems. The relationship of process variables such as temperature and pressure is described in relation to the proper operation of a distillation column. The lesson also presents basic and advanced distillation control strategies.

Professional Development Hours: 1
$23.00

Decimals (A4302)
Math
This lesson provides instruction in mathematical operations that require the use of decimals. Participants learn how to read decimal numbers as well as compare their values and round them. Participants also learn how to add, subtract, multiply and divide decimals, both with pencil and paper and with a calculator. The lesson provides many examples of applications at home and at work.

Professional Development Hours: 1
$23.00

DC Motor Maintenance (A8014)
Electrical Engineering Electric Motors
This lesson introduces participants to the application of direct current motors and their components. This lesson covers general characteristics of a DC motor, DC motor components, their functions and the design of the brush assembly. This lesson explains concepts such as flux interaction, commutation, the effect of multiple windings, armature?? reaction, compensation and CEMF, and how each of these factors effects motor operation.

Professional Development Hours: 1
$23.00

DC Motor Theory (A8013)
Electrical Engineering Electric Motors
This lesson introduces participants to the application of direct current motors and their components. This lesson covers general characteristics of a DC motor, DC motor components, their functions and the design of the brush assembly. This lesson explains concepts such as flux interaction, commutation, the effect of multiple windings, armature reaction, compensation and CEMF, and how each of these factors effects motor operation.

Professional Development Hours: 1
$23.00

Data Transmission, Conversion, and Storage (A9404)
Electrical Engineering
This lesson demonstrates the use of data transmission circuits, including multiplexer and demultiplexer circuits. The lesson explains digital-to-analog and analog-to-digital converter circuits and teaches different types of memory. Troubleshooting of data transmission circuits is also performed.

Professional Development Hours: 1
$23.00

Body Types and Trim (ACV01)
Instrumentation
This lesson explains control valve selection factors and demonstrates typical linear and rotary control valve functions and applications. Control valve bodies for several types of valves including globe, butterfly, and ball valves are described. The function and components of valve trim, including the relationship between flow characteristic and trim type is explained.

Professional Development Hours: 1
$23.00

Body and Trim Maintenance (ACV03)
Instrumentation
This lesson applies the concepts and terminology associated with control valve body types and trim, actuators and position to the disassembly, repair, parts replacement and reassembly of linear and rotary action control valves. Symptoms of valve malfunctions, lapping, and post-repair tests are also covered.

Professional Development Hours: 1
$23.00

CP Disassembly, Inspection, and Reassembly (A8902)
Mechanical
This lesson demonstrates how to disassemble, inspect, and reassemble a typical end-suction pump. The locations and functions of pump components are described as well as procedures for measuring and inspecting pump parts, and the steps for checking impeller clearance. General guidelines for installing a mechanical seal are also provided.

Professional Development Hours: 1
$23.00

CP Principles and Troubleshooting (A8901)
Mechanical
This lesson introduces the components and operating principles of a typical centrifugal pump. Normal operating conditions for the pump are described and guidelines for troubleshooting excessive leakage, excessive temperature, and loss of capacity/loss of head are provided.

Professional Development Hours: 1
$23.00